top of page

## YOU ARE LUCKY!!!

YOU ARE ABOUT TO LEARN THE MOST IMPORTANT FINDINGS AND DISCOVERIES ABOUT THE GREAT PYRAMID'S GEOMETRY,

DISCOVERED BY ENGINEER SAMUEL LABOY

THIS IS NOT A NEW THEORY,

THIS IS A NEW DISCOVERY... A FACT!

SOMETHING REAL

## New Geometric Designed Plan of The Great Pyramid

###### Click Figures

SOMETHING ABOUT THE GEOMETRIC DESIGNED PLAN OF THE

GREAT PYRAMID

The existing plans from the Great Pyramid are uncomplete and only represent the “as built dimensions” of the exposed areas of its structure. These dimensions were obtained by surveyors and pyramid investigators during many years of investigations. The drawing plans prepared in this manner are called “as built drawings” and could be equal, or different to those shown in the pyramid designed plan. In this case, the changes made to the original dimensions and to the structure are unknown, and not registered. The original designed plan of this structure never have been found, or reproduced, since its construction about 4,500 years ago.

The designed plans for the construction of the structures are customarily prepared before the construction of the structure is commenced. It shows the dimensions and the specifications that the owner requires for his structure.

However, as an incredible achievement, Samuel Laboy, a Puerto Rican engineer who dedicated 40 years of his professional career to a personal crusade of studies and investigations of the Egyptian pyramids, surprised all with the entire geometric DESIGNED PLAN of this Monumental Construction. As known, the Great Pyramid is the First Wonder and the only in existence, of the Seven Wonders of the Ancient World. Therefore, now it can be said for the first time, that we also have available the geometric designed plan of the Great Pyramid.

To accomplish his extraordinary work, Laboy conceived and designed an architectural geometric template, which he claimed and proved, was used by the Egyptian engineers to design and construct their pyramids. For this, he also designed other important Egyptian pyramids. The template consists of the interlaced figures of a circle, a triangle, and a square, traced using only a drawing compass and a straightedge as tools. The template is completely proportional to its radius which can be expressed in any unit of measurements, be in inches, feet, decimeters, meters, in Egyptian cubits,  or any other unit of our interest. The entire proportional plan will be defined in the same units of measurement used for the radius.

In this case, where a special architectural template is used, the limits of the designed plan are established by the circumference of the circle. The dimensions for the construction of the Great Pyramid structure are limited to the circumference boundary, contrary to other constructions without space limitations.

Laboy’s geometric DESIGNED PLAN was achieved without any reference to the Great Pyramid dimensions, as illustrated in the back page of the enclosed Pyramid Plan. He only used a geometrical procedure and his discovered architectural template. His original designed plan was a dimensionless plan, since the template is dimensionless.  When he selected the appropriate radius for the circle and calculated the entire dimensionless plan, the entire plan of the Great Pyramid emerges. The calculated dimensions are found to be exactly equal to those measured at the Great Pyramid structure. He copyrighted the architectural template and called it the “Perfect Symbol”. It is perfect for different types of designs, especially for pyramids.  The template has proven to be the “origin and the design frame” of the pyramids, as used by the ancient Egyptian designers to build their pyramids.

You are now the lucky owner of this original Geometric DESIGNED PLAN of the Great Pyramid of Egypt, as it was built 4,500 years ago by the Ancient Egyptians.

The DESIGNED PLAN illustrates in its “front”, and “back page”, the pyramid designs of the Cheops, Chephren, Micerinus, the Red, the Bent Pyramid, and others. Although small type fonts were  used to include more text, the additional DVD video contains clear color figures, text and voice explanations (with music), which will provide 2 hours 20 minutes of video presentations to expand the information shown in the DESIGNED PLAN.

The classification of pyramids by their shape is a completely new item investigated and exposed by the author. This item is shown in the front page and fully discussed in his books. The geometric classification and corresponding mathematical formulas developed by the author, are successfully applied to all his designed pyramids.

The “back page of the DESIGNED PLAN” shows in an enlarged figure, the geometric cross sectional view of the dimensionless structure of the Great Pyramid.  It also displays the pyramid’s design process, section by section, for the entire geometrical designed of the Great Pyramid.

“THE PERFECT SYMBOL”